| RGB 203 Rxi |
|
| Video |
| Routing | 3 x 1 router |
| Gain | 0.5 V to 1.45 Vp-p |
| Bandwidth | 300 MHz (-3 dB) |
| Rise time | 1.5 ns |
|
| Video input |
| Number/signal type | 3 analog VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs |
| Connectors | 3 female 15-pin HD |
| Nominal level | 0.7 Vp-p for RGB |
| Minimum/maximum levels | Analog: 0.3 V to 1.45 Vp-p with no offset at unity gain |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 150 kHz |
| Vertical frequency | 40 Hz to 140 Hz |
| Return loss | <-30 dB @ 5 MHz |
| DC offset (max. allowable) | 4 V |
|
| Video output |
| Number/signal type | 1 analog RGBHV, RGBS, RGsB |
| Connectors | 6 female BNC |
| Nominal level | 0.7 Vp-p for RGB |
| Minimum/maximum levels | 0.3 V to 1.30 Vp-p |
| Impedance | 75 ohms |
| Return loss | -30 dB @ 5 MHz |
| DC offset | ±5 mV maximum with input at 0 offset |
|
| Sync |
| Input type | RGBHV, RGBS, RGsB, RsGsBs |
| Output type | RGBHV, RGBS, RGsB |
| Input level | 2 V to 5.5 Vp-p with ±0.2 VDC offset max. |
| Output level | TTL: 4V to 5V p-p, unterminated |
| Input impedance | 510 ohms |
| Output impedance | 75 ohms |
| Max. propagation delay | 85 ns |
| Max. rise/fall time | 2 ns |
| Polarity | RGBHV: tracks polarity (or force negative sync via internal jumper) RGBS, RGsB: negative |
|
| Audio |
| Routing | 2 x 1 stereo router |
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N | >90 dB at rated maximum output (17 dBu), balanced (unweighted) |
| Crosstalk | <-90 dB @ 1 kHz, fully loaded |
| Stereo channel separation | >90 dB @ 1 kHz |
|
| Audio input |
| Number/signal type | 2 PC level stereo, unbalanced |
| Connectors | (2) 3.5 mm mini audio jacks (female) |
| Impedance | >10k ohms, unbalanced, DC coupled |
| Nominal level | -10 dBV (316 mVrms) |
| Maximum level | +8.5 dBu, (balanced or unbalanced) at 1% THD+N |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output |
| Number/signal type | 1 buffered stereo (2 channel) or mono, balanced/unbalanced |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1 dB channel to channel |
| Maximum level (Hi-Z) | >+14 dBu, balanced at 1% THD+N |
| Maximum level (600 ohm) | >+8.5 dBm, balanced at stated %THD+N |
|
| Control/remote — interface |
| Serial control port | RS-232, female 9-pin D connector (also used for contact closure) |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configuration | 2 = TX, 3 = RX, 5 = GND |
| Contact closure | 1 female 9-pin D connector (also used for RS-232) |
| Contact closure pin configuration | 1 = input #1, 4 = input #2, 5 = GND |
| Program control | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) |
|
| General |
| Input power | 100 VAC to 240 VAC, 50-60 Hz, 18 watts, internal |
| MBC power jacks | 9.0 VDC, 0.15 A |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +113 °F (0 to +45 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, vents on left and right sides |
| Mounting | |
| Rack mount | Yes, with optional 1U rack shelf |
| Furniture mount | Yes, with optional under-desk mounting kit or through-desk mounting kit |
| Enclosure type | Metal |
| Enclosure dimensions | 1.75" H x 8.75" W x 8.0" D (1U high, half rack wide) (4.4 cm H x 22.2 cm W x 20.3 cm D; with rear BNCs, D = 8.4" [21.3 cm]) (Depth excludes knobs.) |
| Product weight | 2.2 lbs (1.0 kg) |
| Shipping weight | 5 lbs (3 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.6-101909-D8) |