| Video |
|---|
| Routing | 6 x 1, 2 distributed outputs |
| Gain | -0.33V to +0.33V p-p |
| Peaking: 0%, 50%, 100% (switch-selectable) |
| Bandwidth | 220 MHz (-3dB) |
| Video input |
|---|
| Number/signal type | 6 analog RGBHV, RGBS, RGsB, RsGsBs |
| Connectors | 6 x 5 female BNC |
| Minimum/maximum levels | Analog: 0.3V to 1.45V p-p with no offset at unity gain |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 150 kHz (optimum 15 kHz to 62 kHz) |
| Vertical frequency | 30 Hz to 170 Hz |
| Return loss | -30dB @ 5 MHz |
| Video output |
|---|
| Number/signal type | 2 analog RGBHV, RGBS, RGsB |
| Connectors | 2 x 6 female BNC |
| Minimum/maximum levels | 0.5V to 1.45V p-p |
| Impedance | 75 ohms |
| Return loss | -30dB @ 5 MHz |
| Sync |
|---|
| Input type | Autodetect: RGBHV, RGBS, RGsB, RsGsBs |
| Output type | RGBHV: at all times |
| RGBS: at all times |
| RGsB: switch-selectable |
| Input level | 2.0V to 5.5V p-p with ±0.2VDC offset max. |
| Output level | 4.0V to 5.0V p-p |
| Input impedance | 10 kohms |
| Output impedance | 75 ohms |
| Max. propagation delay | 88 nS |
| Max. rise/fall time | 3.2 nS |
| Polarity | Positive, negative |
| Audio |
|---|
| Routing | 6 x 1, 2 distributed outputs |
| Gain | Unbalanced 0dB, balanced +6dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05dB |
| THD + Noise | 0.03% @1 kHz, 0.3% @ 20 kHz, +15dBu input, +21dBu output |
| Balanced input and output |
| S/N | >90dB, balanced, at rated maximum output (+21dBu) |
| Crosstalk | >65dB @ 20 kHz,: >80dB @1 kHz, >80dB below 60 kHz, fully loaded |
| Stereo channel separation | >80dB @1 kHz, >60dB @ 20 kHz |
| CMRR | >75dB: 20 Hz to 20 kHz |
| Audio input |
|---|
| Number/signal type | 6 stereo, balanced/unbalanced |
| Connectors | 6: 3.5 mm captive screw connectors, 5 pole |
| Impedance | >25 kohms balanced, 50 kohms unbalanced, DC coupled |
| Maximum level | +19.5dBu, balanced or unbalanced |
| Input gain adjustment | _15.0dB to +9.0dB, adjustable per input |
| | |
| Audio output |
|---|
| Number/signal type | 2 stereo (2 channel), balanced/unbalanced |
| Connectors | 2: 3.5 mm captive screw connectors, 5 pole |
| Impedance | Unbalanced 50 ohms, balanced 100 ohms |
| Gain error | ±0.1dB channel to channel |
| Maximum level (Hi-Z) | >+21.0dBu, balanced at stated %THD+N |
| Maximum level (600 ohm) | > +15.0dBu, balanced at stated %THD+N |
| Control/remote — switching interface |
|---|
| Serial control port | RS-232, 9-pin female D connector |
| Baud rate and protocol | 9600, 8-bit, 1 stop bit, no parity |
| Serial control pin configurations | 2 = TX, 3 = RX, 5 = GND |
| Contact closure | 9-pin female D connector |
| Contact closure pin configurations | 1 = input 1, 4 = input 2, 5 = GND, 6 = input 3, 7 = input 4, 8 = input 5, 9 = input 6 |
| Program control | Extron's control program for Windows® |
| Extron's Simple Instruction Set™ _ SIS™ |
| General |
|---|
| Power | 100VAC to 240VAC, 50/60 Hz, 20 watts,: internal, auto-switchable |
| Temperature/humidity | Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing |
| Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing |
| Rack mount | Yes |
| Enclosure type | Metal |
| Enclosure dimensions | 3.5" H x 19.0" W* x 9.5" D |
| 8.89 cm H x 48.26 cm W* x 24.13 cm D |
| Depth excludes connectors and knobs.: *Width includes attached rack ears.) |
| Shipping weight | 16 lbs (7.2 kg) |
| DIM weight: 25 |
| Vibration | ISTA/NSTA 1A in carton (International Safe Transit Association) |
| Approvals | UL, CE, FCC Class A |
| MTBF | 30,000 hours |
| Warranty | 3 years parts and labor |
| (7.2-010901-D1) | |