Product Home
USB for Pro AV
USB Extenders
AV to USB Bridges USB Collaboration Switchers USB Matrix Switchers USB Switchers USB Hubs USB AV Connectivity Modules USB Cables & Adapters USB Power Products USB-C Products
USB Extender xi Series
DTP3 CrossPoint 42 Series DTP3 R 301 DTP3 R 331 DTP3 T 301 DTP3 T 321 DTP3 T 322 D DTP3 T 331 FOX USB Extender Plus UCS 504 UCS 900 Series UCS 910 Series USB Extender Plus Series USB Extender xi Series

Twitter Copy Link

New Pro

USB Extender xi Series

Twisted Pair Extenders for USB

Key Features

Extends USB peripherals up to 1,980 feet (600 meters) through a Gigabit Ethernet network
Extends USB peripherals up to 330 feet (100 meters) point-to-point over one CATx cable
Supports High-Speed (USB 2) and earlier devices and is compatible with USB 3 devices that can operate at High-Speed data rates
Transmitter can be powered by host device or included power supply
Choice of rack-mountable and architectural form factors
USB matrix controller lets you easily create small or large USB switching systems
All Features

Previous Next

Image Gallery

Interactive Overview

Compare Features

Consultant Descriptions

Note: The USB Extender xi Series is not compatible with USB Extender Plus Series products.

Overview
Video
Description
Specifications
Diagram
Panel Drawing
Downloads

Overview

The USB Extender xi Series extends and switches USB signals from peripheral devices to a host computer up to 1,980 ft (600 m) through a Gigabit Ethernet network or up to 330 ft (100 m) point-to-point over one CATx cable. It supports High-Speed (USB 2) and earlier devices. The transmitter can be powered by the host computer or included power supply and includes USB peripheral emulation to enable trouble-free booting of a host computer that is not connected to a keyboard or mouse. The receiver features a built-in, active four‑port hub with up to 500 mA of power per port. The controller provides simple setup and control for a distributed USB matrix switching system over an Ethernet network. The USB Extender xi Series supports USB peripherals such as keyboards, mice, mass storage devices, and webcams in Pro AV environments.

Video

Description

Specifications

Diagram

Panel Drawing

Downloads

USB Extender xi T

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0, USB 2.0, or USB 1.1 hosts
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T (60-1964-12); no alternates or equals.

USB Extender xi T

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0, USB 2.0, or USB 1.1 hosts
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T (60-1964-12); no alternates or equals.

USB Extender xi R

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the receiver on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R (60-1964-13); no alternates or equals.

USB Extender xi R

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the receiver on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R (60-1964-13); no alternates or equals.

USB Extender xi T D

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type mini B connector located on the front panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T D (60-1966-12); no alternates or equals.

USB Extender xi T D

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type mini B connector located on the front panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T D (60-1966-12); no alternates or equals.

USB Extender xi R D

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R D (60-1966-13); no alternates or equals.

USB Extender xi R D

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R D (60-1966-13); no alternates or equals.

USB Extender xi R AAP

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a architectural adapter plate module enclosure that fits within an AV connectivity mounting frame
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R AAP (60-1965-22); no alternates or equals.

USB Extender xi R AAP

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a architectural adapter plate module enclosure that fits within an AV connectivity mounting frame
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R AAP (60-1965-22); no alternates or equals.

USB Extender xi T HID

Provide a transmitter for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T HID (60-1967-12); no alternates or equals.

USB Extender xi T HID

Provide a transmitter for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T HID (60-1967-12); no alternates or equals.

USB Extender xi R HID

Provide a receiver for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the receiver on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus R HID (60-1967-13); no alternates or equals.

USB Extender xi R HID

Provide a receiver for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the receiver on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus R HID (60-1967-13); no alternates or equals.

USB Matrix Controller xi

Provide a matrix controller for switching USB signals using up to 64 USB Extender Plus Series or USB Extender xi Series transmitters and receivers connected to USB hosts and peripherals such as human interface devices, imaging devices, mass storage devices, and other USB devices over CATx cable via a Gigabit Ethernet network.
1. Twisted pair matrix controller for up to 64 USB Extender xi Series or USB Extender Plus Series transmitters and receivers
  1. Shall support central control of USB Extender xi and USB Extender Plus transmitters and receivers using CATx cabling connected to an Ethernet network
    1. USB Extender xi and USB Extender Plus transmitters/receivers can only connect to the same model series and will not work between series
  2. Shall support 10/100/100Base-T Ethernet
  3. Shall support Extron PCS software for matrix configuration and loading transmitter and receiver IP address information
  4. Shall support simple SIS commands to control USB switching using an Extron control system or a third party control system
  5. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel for communication with USB Extender xi Series or USB Extender Plus transmitters/receivers and for integration into a control system
  6. Shall provide one (1) bidirectional RS-232 connector on rear panel for integration into a control system
  7. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  8. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1.7 inch (4.3 cm) high, quarter rack width metal enclosure
  2. Shall provide front panel port status indicators for Tx, Rx, RTS, and CTS
  3. Shall be plenum rated to meet UL 2043 standards for heat and smoke release, excluding power supply
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  5. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Matrix Controller xi (60-2022-01); no alternates or equals.

USB Matrix Controller xi

Provide a matrix controller for switching USB signals using up to 64 USB Extender Plus Series or USB Extender xi Series transmitters and receivers connected to USB hosts and peripherals such as human interface devices, imaging devices, mass storage devices, and other USB devices over CATx cable via a Gigabit Ethernet network.
1. Twisted pair matrix controller for up to 64 USB Extender xi Series or USB Extender Plus Series transmitters and receivers
  1. Shall support central control of USB Extender xi and USB Extender Plus transmitters and receivers using CATx cabling connected to an Ethernet network
    1. USB Extender xi and USB Extender Plus transmitters/receivers can only connect to the same model series and will not work between series
  2. Shall support 10/100/100Base-T Ethernet
  3. Shall support Extron PCS software for matrix configuration and loading transmitter and receiver IP address information
  4. Shall support simple SIS commands to control USB switching using an Extron control system or a third party control system
  5. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel for communication with USB Extender xi Series or USB Extender Plus transmitters/receivers and for integration into a control system
  6. Shall provide one (1) bidirectional RS-232 connector on rear panel for integration into a control system
  7. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  8. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1.7 inch (4.3 cm) high, quarter rack width metal enclosure
  2. Shall provide front panel port status indicators for Tx, Rx, RTS, and CTS
  3. Shall be plenum rated to meet UL 2043 standards for heat and smoke release, excluding power supply
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  5. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Matrix Controller xi (60-2022-01); no alternates or equals.

Add Item to Cart

Order Message Number

Part #

Note: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

Qty

Current Total:

View Cart

USB Extender xi Series -

Product Details

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Share this item via Email

USB Extender xi Series

Twisted Pair Extenders for USB

Send to: *

Please enter a valid e-mail address.

Message:

( characters remaining)

Send me a copy

Thank you. Your email has been sent.

An error occurred while sending your e-mail. Please try again later.